# ABINIT, tutorial on DFT+U :

## The projected density of states of NiO

This lesson aims at showing how to perform a DFT+U calculation using Abinit.

You will learn what is a DFT+U calculation and what are the main input variables controlling this type of calculation.

It is supposed that you already know how to do PAW calculations using ABINIT. Please follow the two lessons on PAW in ABINIT (PAW1, PAW2), if this is not the case.

This lesson should take about 1 hour to complete.

##### Copyright (C) 2008-2012 ABINIT group (SPesant,MCote,XG)

This file is distributed under the terms of the GNU General Public License, see
~abinit/COPYING or
http://www.gnu.org/copyleft/gpl.txt .

For the initials of contributors, see ~abinit/doc/developers/contributors.txt .

Goto :

**ABINIT home Page**

**|**

**Suggested acknowledgments**

**|**

**List of input variables**

**|**

**Tutorial home page**

**|**

**Bibliography**

Help files :

**New user's guide**

**|**

**Abinit (main)**

**|**

**Abinit (respfn)**

**|**

**Mrgddb**

**|**

**Anaddb**

**|**

**AIM (Bader)**

**|**

**Cut3D**

**|**

**Optic**

**Content of the DFT+U lesson**

- 0. Short summary of the DFT+U method
- 1. Ground state calculation of NiO using LDA
- 2. Ground state calculation of NiO using DFT+U with the FLL double-counting method.
- 3. Initialization of the density matrix in DFT+U for the NiO crystal
- 4. Ground state calculation of NiO using DFT+U with the AMF double-counting method.
- 5. Projected density of states in DFT+U

**0. Short summary
of the DFT+U method**

The standard Local Density Approximation (LDA), where the exchange and correlation energy is fit to homogenous electron gas results, is a functional that works well for a vast number of compounds. But, for some crystals, the interactions between electrons are so important that they cannot be represented by the LDA alone. Generally, these highly correlated materials contain rare-earth metals or transition metals, which have partially filled d or f bands and thus localized electrons.

The LDA tends to delocalize electrons over the crystal, and each electron feels an average of the Coulombic potential. For highly correlated materials, the large Coulombic repulsion between localized electrons might not be well represented by a functional such as the LDA. A way to avoid this problem is to add a Hubbard-like, localised term, to the LDA density functional. This approach is known as LDA+U (actually DFT+U). In the actual implementation, we separate localized d or f electrons, on which the Hubbard term will act, from the delocalized ones (s and p electrons). The latter are correctly described by the usual LDA calculation. In order to avoid the double counting of the correlation part for localized electrons (already included in the LDA, although in an average manner), another term - called the double-counting correction - is subtracted from the Hamiltonian.

In Abinit, two double-counting corrections are currently implemented :

-The Full localized limit (FLL) (see A. Lichtenstein et al PRB 52, 5467 (1995))

-The Around Mean Field (AMF) (see M. T. Czyzyk and G. A. Sawatzky PRB 49, 14211 (1994))

For some systems, the result might depend on the choice of the double-counting method. However, the two methods generally give similar results.

**1.
Ground state
calculation of NiO using LDA**

You might create a subdirectory of the ~abinit/tests/tutorial directory, and use it for the tutorial. In what follows, the names of files will be mentioned as if you were in this subdirectory

*Copy the files ../Input/tldau_1.in and
../Input/tldau_1.files in your Work directory and run*

This run should take less than 30 seconds on a PC 3 GHz. It calculates the LDA ground state of the NiO crystal. A low cutoff and a small number of k-points are used in order to speed up the calculation. During this time you can take a look at the input file.

The NiO crystallizes in the rocksalt structure, with one Ni and one O atom in the primitive cell (the crystallographic primitive cell). However, NiO is known to exhibit an antiferromagnetic ordering at low temperature (along the <111> direction). From the electronic point of view, the true unit cell has two Ni and two O atoms : the local magnetic moment around the first Ni atom will have a sign opposite to the one of the other Ni atom.

You should take some time to examine the values used for the input variables xred, rprim (note the last line !), typat, spinat, nsppol, and nspden, that define this antiferromagnetic ordering along the <111> direction (of a conventional cubic cell).

If you take a look at the output file (tldau_1.out), you can see the integrated total density in the PAW spheres (see the PAW1 and PAW2 tutorials on PAW formalism). This value roughly estimate the magnetic moment of NiO :

Integrated total density in atomic spheres: ------------------------------------------- Atom Sphere radius Integrated_up_density Integrated_dn_density Total(up+dn) Diff(up-dn) 1 2.31080 5.13854514 3.85089008 8.98943522 1.28765506 2 2.31080 3.85089008 5.13854514 8.98943522 -1.28765506 3 1.41465 2.24151993 2.24151993 4.48303985 -0.00000000 4 1.41465 2.24151993 2.24151993 4.48303985 -0.00000000 Note: Diff(up-dn) can be considered as a rough approximation of a local magnetic moment.

The atoms in the output file, are listed as in the typat variable (the first two are nickel atoms and the last two are oxygen atoms). The results indicate that spins are located in each nickel atom of the doubled primitive cell. Fortunately, the LDA succeeds to give an antiferromagnetic ground state for the NiO. But the result does not agree with the experimental data. The magnetic moment (the difference between up and down spin on the nickel atom) range around 1.6-1.9 according to experiments (A. K. Cheetham and D. A. O. Hope, Phys. Rev. B. 27, 6964 (1983), H. A. Alperin, J. Phys. Soc. Jpn. 17, 12 (1962), W. Neubeck et al., J. Appl. Phys. 85, 4847 (1999), G. A. Sawatzky and J. W. Allen, Phys. Rev. Lett. 53, 2339 (1984) and S. Hufner et al., Solid State Comm. 52, 793 (1984) ). Also, the band gap obtained between the last occupied (0.29306 Ha, at k point 2) and the first unoccupied band (0.32410 Ha, at kpoint 10) is approximately 0.8 eV which is lower than the measured value of 4.0-4.3 eV (This value could be modified using well-converged parameters but would still be much lower than what is expected).

Making abstraction of the effect of insufficiently convergence parameters, the reason for the discrepancy between the DFT-LDA data and the experiments is first the fact the DFT is a theory for the ground state and second, the lack of correlation of the LDA. Alone, the homogenous electron gas cannot correctly represent the interactions among d electrons of the Ni atom. That is why we want to improve our functional, and be able to manage the strong correlation in NiO.

**2.
Ground state
calculation of NiO using DFT+U with the FLL double-counting**

As seen previously, the LDA does not gives good results for the magnetization and band gap compared to experiments.

At this stage, we will try to improve the correspondence between calculation and experimental data. First, we will use the DFT(LDA)+U with the Full localized limit (FLL) double-counting method.

FLL and AMF double-counting expressions are given in the papers listed above, and use the adequate number of electrons for each spin. For the Hubbard term, the rotationally invariant interaction is used.

It is important to notice that in order to use LDA+U in Abinit, you must employ PAW pseudopotentials.

*You should run abinit on the input file
tldau_2.in. This calculation takes less than 30 seconds on a PC 3.0 GHz *

During the calculation, you can take a look at the input file. Some variable describing the LDA+U parameters have been added to the previous file. All other parameters were kept constant from the preceeding calculation. First, you must set the variable usepawu to one (for the FLL method) and two (for the AMT method) in order to enable the LDA+U calculation. Then, with lpawu, you give for each atomic species (znucl) the values of angular momentum (l) for which the LDA+U correction will be applied. The choices are 2 for d-orbitals and 3 for f-orbitals. You cannot treat s and p orbitals with LDA+U in the present version of ABINIT. Also, if you do not want to apply LDA+U correction on a species, you can set the variable to -1. For the case of NiO, we put lpawu to 2 for Ni and -1 for O.

Finally, as described in the article cited above for FLL and AMF, we must define the screened Coulomb interaction between electrons that are treated in LDA+U, with the help of the variable upawu, and the screened exchange interaction, with jpawu. Note that you can choose the energy unit by indicating at the end of the line the unit abbreviation (e.g. eV or Ha). For NiO, we will use variables that are generally accepted for this type of compound:

upawu = 8.0 eV

jpawu = 0.8 eV (10 % of U)

You can take a look at the result of the calculation. The magnetic moment is now :

Integrated total density in atomic spheres: ------------------------------------------- Atom Sphere radius Integrated_up_density Integrated_dn_density Total(up+dn) Diff(up-dn) 1 2.31080 5.33795206 3.57704441 8.91499648 1.76090765 2 2.31080 3.57704441 5.33795206 8.91499648 -1.76090765 3 1.41465 2.26897055 2.26897055 4.53794110 -0.00000000 4 1.41465 2.26897055 2.26897055 4.53794110 0.00000000 Note: Diff(up-dn) can be considered as a rough approximation of a local magnetic moment.NiO is found antiferromagnetic, with a moment that is in reasonable agreement with experimental results. Moreover, the system is a large gap insulator with about 4.8 eV band gap (the 16th band at k point 6 has an eigenenergy of 0.24024 Ha, much lower than the eigenenergy of the 17th band at k point 10, namely 0.41554 Ha). This number is very approximative, since the very rough sampling of k points is not really appropriate to evaluate a band gap, still one obtains the right physics.

A word of caution is in order here. It is NOT the case that one obtain systematically a good result with the LDA+U method at the first trial. Indeed, due to the nature of the modification of the energy functional, the landscape of this energy functional might present numerous local minima.

Unlike LDA+U, for the simple LDA (without U), in the non-spin-polarized case, there is usually only one minimum, that is the global minimum. So, if it converges, the self-consistency algorithm always find the same solution, namely, the global minimum. This is already not true in the case of spin-polarized calculations (where there might be several stable solutions of the SCF cycles, like ferromagnetic and ferromagnetic), but usually, there are not many local minima, and the use of the spinat input variables allows one to adequately select the global physical characteristics of the sought solution.

By contrast, with the U, the spinat input variable is too primitive, and one needs to be able to initialize a spin-density matrix on each atomic site where a U is present, in order to guide the SCF algorithm.

The fact that spinat works for NiO comes from the relative simplicity of this system.

**3.
Initialization of the density matrix in LDA+U for the NiO crystal**

*You should begin by running the
tldau_3.in file before continuing.*

In order to help the LDA+U find the ground state, you can define the initial density matrix for correlated orbitals with dmatpawu. To enable this feature, usedmatu must be set to a non-zero value (default is 0). When positive, the density matrix is kept to the dmatpawu value for the usedmatpu value steps. For our calculation(tldau_3.in) , usedmatpu is 5, thus the spin-density matrix is kept constant for 5 SCF steps.

In the log file (not the usual output file), you might find for each step, the calculated density matrix, followed by the imposed density matrix. After the first 5 SCF steps, the initial density matrix is no longer imposed. Here is a section of the log file, in which the imposed occupation matrices are echoed :

------------------------------------------------------------------------- Occupation matrix for correlated orbitals is kept constant and equal to initial one ! ---------------------------------------------------------- == Atom 1 == Imposed occupation matrix for spin 1 == 0.90036 0.00000 -0.00003 0.00000 0.00000 0.00000 0.90036 -0.00001 0.00000 0.00002 -0.00003 -0.00001 0.91309 -0.00001 0.00000 0.00000 0.00000 -0.00001 0.90036 -0.00002 0.00000 0.00002 0.00000 -0.00002 0.91309 == Atom 1 == Imposed occupation matrix for spin 2 == 0.89677 -0.00001 0.00011 -0.00001 0.00000 -0.00001 0.89677 0.00006 0.00001 -0.00010 0.00011 0.00006 0.11580 0.00006 0.00000 -0.00001 0.00001 0.00006 0.89677 0.00010 0.00000 -0.00010 0.00000 0.00010 0.11580 == Atom 2 == Imposed occupation matrix for spin 1 == 0.89677 -0.00001 0.00011 -0.00001 0.00000 -0.00001 0.89677 0.00006 0.00001 -0.00010 0.00011 0.00006 0.11580 0.00006 0.00000 -0.00001 0.00001 0.00006 0.89677 0.00010 0.00000 -0.00010 0.00000 0.00010 0.11580 == Atom 2 == Imposed occupation matrix for spin 2 == 0.90036 0.00000 -0.00003 0.00000 0.00000 0.00000 0.90036 -0.00001 0.00000 0.00002 -0.00003 -0.00001 0.91309 -0.00001 0.00000 0.00000 0.00000 -0.00001 0.90036 -0.00002 0.00000 0.00002 0.00000 -0.00002 0.91309

Generally, the LDA+U functional meets the problem of multiple local minima, much more than the usual LDA or GGA functionals. One often gets trapped in a local minimum. Trying different starting points might be important...

**4.
Ground state
calculation of NiO using LDA+U with the AMF double-counting method.**

Now we will use the other implementation for the double-counting term in LDA+U (in Abinit), known as AMF. As the FLL method, this method uses the number of electrons for each spin independently and the complete interactions U(m1,m2,m3,m4) and J(m1,m2,m3,m4).

As in the preceding run, we will start with a fixed density matrix for d orbitals. You might now start your calculation, with the tldau_4.in and tldau_4.files, or skip the calculation, and rely on the reference file provided in the ~abinit/tests/tutorial/Refs directory. Examine the tldau_4.in file. The only difference in the input file compared to tldau_3.in is the value of usepawu = 2. We obtain a band gap of 4.4 eV. The value of the band gap with AMF and FLL is different. However, we have to remember that these results are not well converged. By contrast, the magnetization,

Integrated total density in atomic spheres: ------------------------------------------- Atom Sphere radius Integrated_up_density Integrated_dn_density Total(up+dn) Diff(up-dn) 1 2.31080 5.30356863 3.57213452 8.87570314 1.73143411 2 2.31080 3.57213452 5.30356863 8.87570314 -1.73143411 3 1.41465 2.27118234 2.27118234 4.54236467 0.00000000 4 1.41465 2.27118234 2.27118234 4.54236467 0.00000000 Note: Diff(up-dn) can be considered as a rough approximation of a local magnetic moment.

is very similar to the LDA+U FLL. In fact, this system is not very complex. But for other systems, the difference can be more important. FLL is designed to work well for crystal with diagonal occupation matrix with 0 or 1 for each spin. The AMF should be used when orbital occupations are near the average occupancies.

**5.
Projected density of states in LDA+U **

Using prtdos 3, you can now compute the projected d and f density of states. For more information about projected density of states, for more details see the PAW1 tutorial.

Goto :

**ABINIT home Page**

**|**

**Suggested acknowledgments**

**|**

**List of input variables**

**|**

**Tutorial home page**

**|**

**Bibliography**

Help files :

**New user's guide**

**|**

**Abinit (main)**

**|**

**Abinit (respfn)**

**|**

**Mrgddb**

**|**

**Anaddb**

**|**

**AIM (Bader)**

**|**

**Cut3D**

**|**

**Optic**