This file provides a description of the operations needed to install the ABINIT package, to generate the executable and to make the tests. It provides also the description of simple modifications of the package, for developers.
See a recent version of the new user's guide, for an introduction to the abinit package. See a recent version of the abinit help file for learning how to use the code. Both of them can be found either on the Web, or in the doc subdirectory of the package.
Any comment or suggestion to improve the procedure will be welcome! Simply contact the ABINIT group (http://forum.abinit.org/).
For the vast majority of people willing to use ABINIT (Unix/Linux, not developers, but users), here follows a short list of instructions needed to install it:
Well, it might also be that information on the Fortran compiler is needed, in which case something like:
instead of the bare "configure", might work, where "your_F90_compiler" has to be replaced by the location of your F90 compiler, such as /usr/local/gcc472/bin/gfortran.
If you succeeded to download, gunzip and untar the ABINIT package, but failed with the next steps, please go to 2. How to make the executables?
If you succeeded to make the executables, but would like to check whether ABINIT has been installed correctly, please go to 3. How to make the internal tests? and the following sections.
If you want to have a much better handling on ABINIT than normal users, or if on the contrary you simply want to download pre-compiled executable (no compilation), or want to use Windows, then go to 1. How to get a version of ABINIT?.
To build the executables you will need at least 400 MBytes of free disk space. Running all tests will require more than 2.5 GBytes.
We will distinguish two cases:
You should read only the appropriate section (you can safely ignore the others ...).
You have a F90 compiler under UNIX/Linux or MacOS X, as well as (free) software like bazaar, automake, autoconf, libtool, perl, python, and you want to have a full handle on the package (compilation, modification of files, writing of scripts). This is the preferred case for developers... We will sometimes refer to this case as the "autotools development mode".
If you do not have these tools, and would like to have them, please consult your local computer guru, and the following pages:
If you want to develop, please have a bazaar branch (public + private) created for you by contacting Yann Pouillon or Jean-Michel Beuken, as described in these pages.
It is strongly advised to subscribe to the ABINIT forum if you want to be able to get the latest information concerning the autotools development mode.
After having installed Bazaar, and obtained a branch on the ABINIT worldwide repository, create an automomous copy of the source code, on top of which you have to make your development:
bzr branch bzr+ssh://forge.abinit.org/abinit/(developer)/(branch)
As an example, for the development of version 8.0 for the user 'hacker', issue:
bzr branch bzr+ssh://forge.abinit.org/abinit/hacker/8.0.7-private
For your branches (public + private) on the ABINIT worldwide repository, you will have the permission not only to download, but also to commit (push) your modifications. You might alternatively download other branches of the archives, but you will not be able to commit in these branches. So, do not start to modify these, you will not be able to include them afterwards in the archive.
Working with bzr branch creates a local archive for your daily work, this archive being linked to the main ABINIT archive. This very efficient technique is recommended, as it makes you more independent for the management of your work (you will be able to create new branches). One big advantage of this technique is that people working with a laptop can develop and commit safely without a network connection.
or the shorter:
This command initializes a whole set of files and scripts, needed for the autotools, as well as for the global work on ABINIT sources. This initialization might take up to two minutes.
After this initialisation, you can proceed to the generation of the executables, as described in section 2.
You have a F90 compiler under UNIX/Linux or MacOS X and you want simply to compile the source files, and, from time to time, modify and/or add a new file. This is the case of most users, system managers, and also many developers. If you want to modify and/or add a new file, please consult the section 7. For developers : how to modify the code? after reading the present section.
In what follows, x.x.x represents the ABINIT version.
download, gunzip and untar the file abinit-x.x.x.tar.gz
More detailed explanations ...
The abinit-x.x.x.tar.gz gzipped tar file contains all the needed files, including:
It does NOT contain the object files and the binary executable files.
So, execute the following actions:
If correctly done, a main directory, denoted ~abinit in the present document (usually, its real name will be abinit-x.x.x) and a whole set of subdirectories should have been created. One of them is called 'doc/'. It contains many important informations. Many of the files it contains are .html files, that are placed on the Web site. However, many other files are not available in .html format, and are NOT found on the Web site. In the future, keep in mind that the information that you are looking for (but that you cannot find on the Web site) might be in the subdirectories of doc/, esp. doc/theory/, doc/users/, doc/psp_infos/.
You might now go to the section 2.
Do not forget: if you want to modify and/or add a new file, please consult the section 7. For developers: how to modify the code? after reading the present section.
We now suppose that you have a F90 compiler and you want to compile the source files.
In most cases, you will have to provide to the 'make' utility some information: the location of the F90 compiler (and sometimes even the C compiler) on your machine, the adequate compiler options, and, if you want to produce the parallel binaries, the location of the MPI library on your machine.
Although the presently implemented building tools should be powerful enough to succeed to make the binaries without you giving such information, it has been seen that on a significant number of platforms, it is still better to give them.
Supposing that you are in the lucky case where the build system is able to find all the information, then the build of ABINIT is very simple. Issue:
Well, it might also be that only one additional information is needed, in which case something like:
might work. In both cases, let's explain a bit what is done, and the further possibilities.
The 'configure' step produces the set of Makefile files (among other things), taking into account information about your machine and the hostname.ac file. It takes three minute long, or less. The 'make' step compiles everything, according to the Makefile files produced in the prior step. The time to make everything is highly dependent on the compiler and platform. On a 2.8 GHz quad-proc machine (using make mj4), the whole compilation is about 5 minutes. On some other platforms, with only one processor, it might be more than one hour.
The executables will be located in the subdirectory ~abinit/src/98_main, if you have chosen to issue ./configure in the ~abinit directory. If you have issued ./configure in another directory, it will be placed accordingly.
The 'make' command can also be used in many different ways, by mentioning one or more targets. A (partial) list of targets for users can be obtained by typing:
Additional targets, for developers, can be obtained by typing:
It is possible to compile only one of the executable, just after the configure step by typing:
make name_of_the_binary (where name_of_the_binary can be abinit, cut3d, anaddb, ...)
These are only a tiny fraction of the things that you can realize thanks to 'make'. Moreover, there are also 'Makefile' files in most of the subdirectories of ABINIT, with often their own (partial) list of targets for users (and also sometimes for developers). To obtain these lists, go to the directory, and type:
will install abinit in the /usr/local directory.
In case you want to go further, please consult files in ~abinit/doc/build .
Let's come back to the case where the build system needs some more information. This information should be stored in a file named hostname.ac, where "hostname" is the result of executing the command hostname on your machine, e.g. abiref.pcpm.ucl.ac.be or my_machine ... , and taking the first word of the returned chain of character, e.g. abiref or my_machine ...
There is a template for such a file, located in ~abinit/doc/config/. Its name is build-config.ac. Examples of such files, that have been used for testing the package, can be found in ~abinit/doc/build/config-examples/. By the way, the known problems observed for these different tests are mentioned in the ~abinit/KNOWN_PROBLEMS file, and the hostname.ac files are correspondingly indicated at the beginning of this file.
Most of the examples provided in the ~abinit/doc/build/config-examples/ directory contain about five definitions: F90 and C locations, F90 and C options, MPI library location (or the indication that MPI is not enabled). On the other hand, there are many other possible control flags, needed for advanced use. In case you have trouble with some library, (NetCDF, LibXC, ETSF_IO, FoX), you may disable their build.
Your hostname.ac file might be placed in your home directory in a new directory that you will name ~/.abinit/build/. At that location, everytime you install a new version of ABINIT, the needed information will be found by ABINIT, so you do not have to care anymore about this file after the first installation.
On the other hand, if you need to play with several computers, you can place the hostname.ac file directory in the ~abinit directory, where such a hostname.ac file will be also seen by the build system (and preferred over the one located in ~/.abinit/build/) or in your build directory (like ~abinit/tmp/). As mentioned above, you might even type at the terminal the definitions contained in the hostname.ac file.
Note the order of precedence for the location of the hostname.ac file (or command-line information), in case more than one possibility is used, (decreasing order of precedence):
When the hostname.ac file is ready, you have to issue, in the ~abinit directory:
In case you are running under Unix (Linux or another flavour), the abinit code has several small internal tests (three basic ones, called "fast", "v1" and "v5", and then one for each of the libraries "bigdft", "etsf_io", "libxc", "wannier90"), that can be issued automatically, and that check themselves whether the results that have been obtained are right or wrong. These tests are available whether you have got the package from the Web or from the ABINIT archive. Of course, you need to have compiled abinit in order to run the internal tests. Moreover, the simple implementation procedure assumes that the executable is located in ~abinit/src/98_main (the standard location after issuing "make").
You can begin with the test "fast". Simply issue the command:
It will run during a few seconds. It should print:
Status file, reporting on built-in test fast ==> The run finished cleanly. Moreover, comparison of the total energy, and other (few) relevant quantities with reference values has been successful. This does not mean that no problem is present, however. Please run the complete set of ABINIT tests to gain a better confidence in your installation.
This means that the internal test "fast" ran successfully. If you do not get this message, then the executables were not properly generated, or there is a problem with the makefile that drives the internal test. In this case, after having tried to solve the problem by yourself, you should contact somebody in the ABINIT group.
In addition to this small message, you can have access to all generated files, that are located inside the tests/built-in/Input subdirectory.
Supposing test "fast" was OK, then you might issue the command:
The test "fast" will be done once more, followed by the other internal tests. Again, we hope that you will get the positive diagnostics for the other tests. Of course, the "bigdft", "etsf_io", "libxc", and "wannier90" needs the appropriate library to be installed in order to work properly.
For further information on these internal tests, see the ~abinit/tests/built-in/README file.
You might now read the new user's guide, in order to learn how to use the code, and then to follow the four basic tutorials, see the entry page for the tutorials. This is useful if you consider that the installation has been successful. Or you might continue to read the present Web page, and try to perform the speed tests, as well as the other tests.
Although it is possible to make the other tests without knowing really how to use the code (since all steps involved - the run and subsequent analysis - are done automatically), for the other tests, it is recommended to read the new user's guide, and then to follow the four basic tutorials, see the entry page for the tutorials.
Let us pursue with the testing procedure. Go to the ~abinit/tests directory, and issue:
The workhorse script to run the tests is called runtests.py . It is very flexible. A reasonable set of tests (those contained in the fast and v"x" directories), can be run automatically by:
./runtests.py -j4(if you have 4 cores on your computer)
This is the recommended procedure for developers. In order to execute these tests, you will need a larger disk space than for the simple installation of the code (the total additional disk space required is on the order of 1GB).
Let us now examine the different subdirectories.
~ABINIT/tests/fast/ is the simplest, and its content will be described in some detail below. For tests of the parallel version see the directory test/paral/, as well as the ~abinit/doc/paral_use text file. For tests of the response function features of abinit, and for tests of mrgddb and anaddb, see the subdirectories tests/v2. The other directories tests/v3, tests/v4, ... presents further tests of recently implemented features of ABINIT.
1) tests/fast/ (for the sequential version only)
This subdirectory contains a basic set of tests of the code, aimed at testing whether the code is coherent in time (successive versions), and exercising several parts of the code. However, they do not examine its accuracy on physical problems, mainly because the number of plane waves used is too small, and some tests are not run to self-consistent convergence. 32 MB of memory should be enough for these tests.
The description of the tests can be found at the end of the ~abinit/tests/fast/README file.
To run only the tests in this directory, simply issue, in the ~abinit/tests/ directory:
It will create a directory Test_suite All the results will be in that directory. The output files will be automatically compared, thanks to a 'diff' command, to a set of reference files (in ~abinit/tests/fast/Refs/). The corresponding difference files are prefixed by 'diff.'.
In addition to 'diff', there are two other levels of automatic analysis: one based on a comparing tool called 'fldiff', producing 'fldiff.report' files, and another where the output of 'fldiff' is further analyzed, and produce a brief report called 'report'. The latter step is only performed in case all the tests cases of one directory are performed (including the case where tests of different directories are performed)
The one-line summaries produced by fldiff (see later) are compared with the tolerances indicated in the input file (metadata added at the end of the input file). This procedure produces a file called "report", in which there is a one line assessment of the behaviour of each test: succeeded (everything is OK), passed (the test is OK for users in production), passed marginally (the test is within 1.5 of the usually accepted deviation, which is likely OK for most applications - still to be improved by the development team, though), failed (there is a problem, the deviation is usually not accepted). This is by far the most convenient tool to analyze the automatic tests of abinit.
The vast majority of tests cases succeed or pass on all platforms that are used by the developer team in Louvain-la-neuve. Some problems are mentioned in the file ~abinit/KNOWN_PROBLEMS , Additionally, there might be specific problems for some test case for some platforms, also mentioned in ~abinit/KNOWN_PROBLEMS. So, apart of the known problems, mentioned in this file, the "report" file should mention, for each test case, only "succeeded" or "passed".
The comparing tool 'fldiff' -for 'floating diff'- performs in a more detailed way the comparison of floating numbers between the output files and the reference files than in the case of a 'diff' command. As used presently, for each run inside one directory, one single file, called 'fldiff.report', will be produced, and gather the analysis for all tests in that directory.
If for one test case, the two files differ by the number of lines, the 'fldiff.report' file will report that it cannot compare the two files. Usually this problem will be seen at the level of 'command signs' appearing sometimes in the first column of the output files, so a typical error message (announcing something went wrong) will be:
Case_1 22 The diff analysis cannot be pursued: the command sign differ.
By contrast, it will identify the floating numbers and ignore their differences if they are within some prescribed tolerance, or if the difference is not relevant. For example, it is able to ignore the differences in timings. If everything goes fine for a test, fldiff should identify only the differences in:
So, a successful execution of one test case may be announced as follows in the fldiff.report file:
Case_1 2 < Version 8.0.6 of ABINIT > Version 8.0.3 of ABINIT 5 < Starting date: Mon 23 May 2016. > Starting date: Mon 4 Apr 2016 202 < +overall time at end (sec): cpu= 7.1 wall= 8.0 > +Overall time at end (sec): cpu= 7.3 wall= 8.0 Summary Case_1: no significant difference has been found
The fldiff.report file will have one such section for each test_case that was run. It begins with the number of the test case, then includes a few blocks of three lines: the number of the line where something is happening, followed by the content of the two lines. Finally, there is a one-line summary for each test case.
More information on the fldiff script can be found in the ~abinit/tests/Scripts/fldiff.pl file.
This directory contains tests built in the same spirit as those in the test/fast directory, but that exercise other basic features, like the treatment of metals, the GGA, the new pseudopotentials, the multi-dataset mode, the cell parameters optimization, and the spatial symmetry groups database. These were developed during the development time of the version 1 of ABINIT. Of course, the automatic difference procedure only compares to recent runs of the ABINIT code. As for the 'fast' test cases, the fldiff.report and report files are also available. 64 MB of memory should be enough for these tests.
This directory contains tests built in the same spirit as those in the tests/fast/ or tests/v1 directory, but that exercise features not present in version 1 of the ABINIT package, mainly the response function features, and the use of the mrgddb and anaddb codes. Again, the automatic difference procedure only compares to recent runs of the ABINIT code. As for the 'fast' test cases, the fldiff.report and report files are also available. 64 MB of memory should be enough for these tests.
4) tests/v3, tests/v4, tests/v5, tests/v6, tests/v67mbpt, tests/v7, tests/bigdft, tests/etsf_io, tests/libxc, tests/wannier90
These directories contain tests built in the same spirit as those in the test/fast/ directory, but that exercise features not present in the Plane_Wave code, nor in version 1 or 2 of the ABINIT package, noticeably the use of the GW code, the utilities Cut3d, AIM, .., the PAW ... . Or the interfacing with fallbacks. Again, the automatic difference procedure only compares to recent runs of the ABINIT code. As for the 'fast' test cases, the fldiff.report and report files are also available. 64 MB of memory should be enough for these tests.
5) tests/paral/ and tests/mpiio/ (need MPI support)
This directory contains tests built in the same spirit as those in the test/fast/ directory, but that exercise the parallel version of the ABINIT code.
The script runtests.py considers one of the different input files, and for this file, it will use the parallel code with one processing node, then perform different parallel runs with an increasing number of processing nodes, as specified in the metadata contained in the input file. As for the other series of test, the diff and the fldiff utilities are used automatically, and fldiff.report and report files are produced automatically.
6) tests/cpu (for the sequential version only)
This subdirectory contains the scripts, and input files needed for testing the cpu time, either on progressively finer real space grids, or on progressively bigger unit cells. Please read the README file of this directory. Also for this suite of tests is activated with:
Unlike in the previous case, many directories will be created (more than 10 in the present version). Their name begins with the test name (A1, A2, A3, A4, B1, B2, B3, B4, C3, D3), and is followed by the machine name and the date. Inside these directories, many runs are done. There is a 'report' file that summarizes the timing of the different runs, and there is a 'diff' file, that compares these timings with the reference (output files from a PIV at 2.8 MHz, usually).
The structure of these tests is more complex than that of the test/fast/ and test/v1/ directories. The tools used are the 'serie' scripts (serieA,serieB, serieC and serieD) as well as the 'getrep' script. For an explanation, contact the ABINIT group. For the largest tests (B and D series), up to 200MB of central memory are required.
(Of course, you cannot modify the code if you only downloaded a binary package).
If you want simply to modify the content of an existing file (e.g. one of the Fortran files, located in one of the src/* directories), without changing its list of arguments, and recompile the code, the procedure is quite simple. Modify that file, and reissue:
If you want to modify the content of an existing Fortran file as well as the list of arguments, and recompile the code, the procedure is to modify that file, and then issue, in the ~abinit directory:
*/abilint . .
Do not forget the two dots in the abilint command.
If you want to add a new Fortran file, there is a difference whether you work with or without the autotools.
In both cases, you must add the file name in the abinit.src file of the corresponding directory. As an example, suppose that you want to add a new routine named blork.F90 in the directory ~abinit/src/65_nonlocal/. Then, you must also declare it in the ~abinit/src/65_nonlocal/abinit.src file.
Note that the choice of directory is important. You should choose to put your new routine in a directory that has a prefix number (e.g. 42 for 42_nlstrain) higher than all the directories that contain routines you will use (except if the called routines are in the same directory), and smaller than all the directories that call your routine (except for routines that are in the same directory as yours).
If you work with the autotools, you have now to reissue:
*/*/makemake ./configure make
(see the section 2).
If you work without the autotools, you must also modify by hand (i.e. find the places where the Fortran files are listed, and complete the list) the Makefile.in of the directory where the new file has been added (e.g. ~abinit/src/65_nonlocal/Makefile.in).
*/abilint . . make
If you want to produce the source package abinit-x.x.x.tar.gz, type:
Do not forget to change its name (e.g. add your name after x.x.x, to identify that this is a modified version of ABINIT).